Sound-Focusing Stereo Speaker
FPS20
Technical Information for System Engineers
Key Features
• Patented Dual-Parabolic™ dispersion
control technology provides a dramatic
hot spot with crisp stereo separation.
• 514 mm (20.25 in) Custom-molded PETG
clear polymer dome.
• Twin 50 mm (2.0 in) drivers for stereo
music & messaging.
• Patented ZeroReflection™ enclosure
technology for accurate sound
reproduction.
• Narrow 50° coverage angle for sharp focus.
Specifications: FPS20-8
• Single point balanced mounting for
easier and cleaner looking installs.
System Type
2 x 50 mm (2.0 in) Stereo high-directivity focused
sound, voice coil/8 Ohm direct
250 Hz - 16.2 kHz
230 Hz - 17.3 kHz
210 Hz - 18.7 kHz
50 W
25 W
108 dB
91 dB
• Shipped fully assembled; bulk shipping
available upon customer request.
Frequency Response (-3 dB)1
Frequency Response (-6 dB)1
Low Frequency (-10 dB)1
Max. Program Power
Max. Continuous Power RMS2
Max. SPL dB @ .5M
Sensitivity dB @ 1W/0.5M3
Impedance
• Optional wall-mount bracket available.
• Custom colors and printed decorative
and promotional dome covers optional.
Appplications
8 Ohm (nominal value)
Only 20.25” in diameter, SoundTube’s
FPS20 delivers a targeted audio footprint
for a single listener. Tight coverage,
wide-range stereo sound and a smaller
dome make the FPS20 the ideal choice
for focused audio applications, including
kiosks, P.O.P. displays, shows, plasma
displays or anywhere the visual impact
must be minimized.
Coverage Angle (-6 dB)
Directivity Factor (Q)
Directivity Index (DI)
Transducers
Inputs
Dome Material
Enclosure Material
Colors
Dome Diameter
50º @ 2 kHz
12.63 (100 Hz to 10 kHz averaged) 27.35 @ 2 kHz
9.31 dB (100 Hz to 10 kHz averaged) 14.37 dB @ 2 kHz
2 x 50 mm (2.0 in) Wide-range, fiber cone, rubber surround
3 M (10.0 ft) Hardwire lead, 4 conductor
Custom molded PETG clear dome
Molded Plastic ABS driver housing
Clear, custom translucent & opaque colors available
514 mm (20.25 in)
Total Height
223 mm (8.75 in)
Weight
1.70 kG (3.75 lbs)
Accessories
Optional
Patented Dual-Parabolic™
Technology
SoundSleeves™ & Wall Mount Bracket
SoundTube Entertainment is constantly
developing new technologies that enhance
audio product performance. SoundTube
Entertainment’s innovations are protected
by multiple U.S. & international patents,
which explicitly cover SoundTube dome,
enclosure and dispersion technologies.
SoundTube Entertainment actively defends
its patents in order to protect SoundTube
resellers and end users.
Technical Data
SoundTube Entertainment strives to
provide complete and effective technical
information and data to dealers, engineers
and designers. All data are available
from SoundTube Entertainment, or at
www.soundtube.com.
1
Frequency response is measured in full space.
Continuous power rating, EIA-426-B test.
2.83 Volts at a distance of 0.5 meters.
2
3
SoundTube continually develops new product innovations and improvements. Updates to existing
products without prior notice are an example of SoundTube’s drive for constant improvement.
© 2004 SoundTube Entertainment, Inc. All rights reserved. REV 07.20.04
Sound-Focusing Stereo Speaker
FPS20
Technical Information for System Engineers
Horizontal One Octave Polars
250 Hz
500 Hz
1000 Hz
2000 Hz
4000 Hz
8000 Hz
™
™
Technical data, EASE plots, SoundTubeSPEC software & product downloads available at www.soundtube.com
Sound-Focusing Stereo Speaker
FPS20
Technical Information for System Engineers
Mechanical Drawings
Architectural Specifications
The loudspeaker shall consist of two 50
mm (2.0 in) transducers with a voice coil
diamter of 25 mm (1.0 in). Sound waves
from the transducers shall be reflected
from a 514 mm (20.25 in) Dual-Parabolic™
sound dome.
Performance specifications of a typical
production unit shall be as follows: Usable
frequency response shall extend from
210 Hz - 18.7 kHz. The loudspeaker shall be
available in 8 Ohm impedance mode. Rated
power capacity of the components and net-
work shall be at least 25 Watts RMS.
223 mm (8.75 in)
The dome shall be constructed of cus-
tom-molded PETG with an ABS driver
enclosure. The transducers shall have a
fiber cone with butyl rubber surround. The
grille shall be constructed of heat-resistant
ABS plastic material. The overall dome and
cabinet dimensions shall be no more than
514 mm (20.25 in) in diameter by 223 mm
(8.75 in) in height and weigh no more than
1.70 kG (3.75 lbs).
514 mm (20.25 in)
Optional Accessories
89.2 cm (35.1 in)
Installation for the FPS30 shall be
by single point hanging aircraft cable
(AC-HC20) with a 1/4 -20 stud into a
threaded insert on dome apex. Additional
accessories include Wall Mount Bracket
(AC-WB3) and Threaded Hanging Rod
(AC-TR36). Wall bracket is constructed of
cold rolled steel. The hardwired input
connectors shall be tinned, 24-gauge,
4-conductor, color-coded wires. Optional
decorative SoundSleeve™ available for in-
store marketing.
WB3 Wall Mount Bracket
HC20 20’ Hanging Cable
with SpeedClamp™
CPSU Custom Printed SoundSleeve™
SoundTube Entertainment
6430 North Business Park Loop
Park City, Utah 84098
Phone 435.647.9555
Fax
435.647.9666
Toll Free 800.647.TUBE
All SoundTube products come
with a 5-year limited warranty
.
(not shown)
AC-TR36 – Threaded Hanging Rod AC-FE1 – Forged Eyebolt
SoundTube Entertainment manufactures a complete line of speakers for:
Open-Ceiling • In-Ceiling • Surface-Mount • Outdoor • Sound-Focusing
All SoundTube products are designed and engineered in the USA.
|